65 DITCH BANK FLAIL MOWER Cat.I w/PTO Driveline 04160LFB w/HAMMERS Hyd flow cont


Out of stock


This is a premium product that offers higher quality parts and specifications. This product is designed with performance in mind.

Looking for a better way to cut the ditch or bank? Our hydraulic offset pivoting verge mower is flexible and perfect for the job. This verge flail mower will make your project look great. Works just like any normal flail mower pulled directly behind the tractor and with the standard hammer blades it can mulch up to 2” in diameter objects. Same, amazing AGL mower but with premium features to set it apart from the rest.

Key Features:

  • AGL Silver(AGLB) has a Multiple V-Belt drive with automatic belt tension & holder for hoses.
  • AGL Gold(AGLC) also has a Multiple V-Belt drive with automatic belt tension along with a hydraulic flow control for smoother movement of the mower.
  • Cat I – 3 pt w/s Spline PTO drive shaft
  • Balanced rotor shaft.
  • Hydraulic up 90° and down 60° movement. Side to side movement for hard to reach areas.
  • Rear roller with adjustable cutting height.
  • 65 horsepower gear box.
  • Uses EF & EFG series blades with standard all purpose hammer blades.
  • Articulates 100% passed the right arm horizontally, and adds an additional 20” in the vertical position.
  • Extra strong and built with safety in mind.
  • Durable Powder Coat Finish.



Spec VL-AGLC165
Working Width 65”
Overall Width 71”
Min. HP Req. 40 HP+
Hitch Cat I
Gear Box Rating 65 HP
Pivot Offset 65” Right
Vertical Offset 150 Degrees
Std Hammer Blades 28 Blades
Housing Thickness 1/4”
Side Plate Thickness 1/4”
Rotor Dia. 4”
Rotor Shaft Dia. 4 1/2”
Blade Swing 14”
No. of Belts 3
3pt Conn. Width 28” – 29”
Driveline Type 6-Spline w/shear bolt
Weight 820 lbs
Crated Weight 945 lbs


Overall Width: The VL-AGL C165 has a overall width of 71″.

Cutting Width: The VL-AGL C165 has a tilling width of 65″.

Weight: The VL-AGL C165 has a weight 820 lbs.

HP Requirements at PTO: The VL-AGL C165 requires 40 – 65 PTO horsepower.

Cutting Height: The VL-AGL series has a 0″ – 6″ Adjustable to meet various height requirements

Housing Material Thickness: The VL-AGL series has a housing of 1/4″ thick.

Side Plate Thickness: The VL-AGL series has a side plate thickness of 1/4″.

Blade Type: The VL-AGL series uses standard hammer blade. Each hammer blade weighs 14 oz made of cast steel (cast steel is much more durable than cast iron).  Use the hammer blades for clearing saplings (2″ diameter or less) and for grasses.

Number of Blades: The VL-AGL C165 uses 28 hammer blades.

Precision Blade Overlap: On the VL-AGL series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.

Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.

Rotor Tube Diameter: 4 1/2″- Heavy duty steel tubing for long life.

Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.

Hitch Type: Category 1 standard 3-point.

Pivot Offset From Center Mount: This feature allows for offset from center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways etc. From the center of the PTO the mower extends 65″.

Hydraulic Offset: The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence line, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as 2-way valve) or the rear remote on your tractor design to power the cylinder. Hydraulic Requirements: Hydraulic source must be constant flow for powering Control Valve. We recommend use of Front Loader Style Control Valve with Float Option. Float spool connected to the vertical pivoting cylinder will allow mower to float and naturally follow the ground contour.

Drive Belts: The VL-AGL C165 uses 3 belts.

Gearbox Rating: Up to 65 hp. Heavy duty proven oil bath gearbox for long life.

Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO

Finish: Baked on powder coat, powder coat is superior to paint.

Warranty: 2 year parts warranty with an optional 2 year extension.

Support Before and After the Sale: At Betstco  our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.

Additional information

Weight 935 kg
Working Width


Overall Width


Min. HP Req.

40 HP +


Cat I

Gear Box Rating

65 HP

Pivot Offset

65” Right

Vertical Offset

150 degrees

Optional Grass Blades

56 Blades

Hammer Blades

28 Blades

Housing Thickness


Side Plate Thickness


Roller Dia


Rotor Shaft Dia.

4 1/2"

Blade Swing


No. of Belts


3 PT. Conn. Width

28" – 29"

Driveline Type

6-Spline w/Shear Bolt


2 Year


820 lbs

Shipped Weight

945 lbs