78″ Rough Duty Flail Mower, VL-MF200CM

$3,050.00

Out of stock

SKU: VL-MF200CM Category: Tags: ,

Description

Flail Mowers are useful for jobs where you are cutting grass on uneven ground, high grass, weeds, brush, and other debris. A flail mower doesn t throw grass, instead it cuts finely and leaves the cuttings on the ground where it was cut making it an excellent choice for those places where you could cause damage by throwing debris. Highway mowing and park maintenance often use flail mowers because they are less likely to throw objects during cutting.The EFGCM Series (Field & Brush) Flail Mower is an option if you are working on un-even ground, brush, stumps, and other items that your mower must handle. This M Series mower has a double re-enforced curved deck and stronger 3-pt connection that can handle the twisting forces that occur when only one side of your mower deck is on the ground. With its fast blade tip speed and interchangeable blades it is perfect for your grounds keeping tasks. If you need to maintain grass and cover crops, install the optional Grass blades. This model is great for acreage 15+.

  • For Tractors 35+ HP
  • Comes with 27 oz. Hammer Blades
  • Multiple Drive Belts Assure Power to the Blades
  • Under Deck Clump Busters
  • Standard 3-Pt Category I & II Hitch Mount
  • Shear Bolt PTO Shaft for Standard 1-3/8 6-Spline PTO
  • Adjustable Finished Cutting Height (both Rear Roller & Skids)
  • Balanced Rotor and Shaft
  • Powder Coat Paint Finish

For Complete Specifications See Brochure Under Additional Resources Below

Gear Box
The EFGCM Series has a rugged cast iron gearbox. The gearbox has a continuous rating of 65 HP.

Bearings
Bearings are greasable and replaceable. Sizing is standard and can be purchased at any local bearing shop.

Blade Arrangement
Flail mowers come in different sizes. The EFGCM Series sizes vary from 83 – 92 inches. The number of flail blades and their arrangement varies. Blades are measured as blades per foot of rotor. A mower with a large number of blades gives a closer and cleaner cut than a mower with fewer blades.

Blade (Knife) Options
When the shaft or axle rotates at a high speed on the mower, the attached flail blades are pushed out by centrifugal force and sever grass, weeds and brush. The EFGCM Series available blades are Hammer blades (27 oz./766g) . Designed for brush; up to 3 in diameter. These blades may be sharpened and used for lawn grooming. Grass Y blades (10.9 oz./309g). These blades provide a finer and smoother finish.

Cutting Height
Cutting height can be adjusted by the tractor s 3-Pt hitch or by the mowers adjustable rear roller. The EFGCM Series can be adjusted to cut grass 1/4 – 6 inches. Mower is also equipped with anti-scalping side rails and a tapered roller to ensure smooth turns.

Adjustable Offset
Right Side Offset is very helpful if you are working around fence lines, trees or other item s in the field. The offset is the addition to ½ the total mowing width. The distance is listed in the specifications table is the addition that is added to ½ the mowing width from center of the gearbox to the right cutting edge.

Support Before and After the Sale
At Betstco Value-Leader our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble free machine from the get go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.

 

Additional information

Weight 998 kg
Working Width

77"

Overall Width

83"

Min. HP Req

35 HP Fits a large number of consumer, municipality & landscape tractors

Hitch

Cat I or Cat II Allowing you to utilize your Cat I toplink & lift Arm 5/8"   connection or your Cat II 3/4" top link & 7/8" Lift Arm connection

PTO Speed

540 RPM

Gearbox Rating

65 HP Maximum torque load that can be applied to the output shaft for continuous operation in ideal conditions. The service life may be compromised if the load exceeds this rate. 

Heavy Duty Gearbox

Standard Cast iron gearbox 540 rpm with free wheel for added strength

Knife Tip Speed

9,805 This provides for a clean cut & uplift you need to mulch pruning's, & cut down that underbrush or clear a path

3-pt Offset

16" 3-Point Hitch may be attached at a position allowing you to change mowers right offset when looking at the mower from operators seat

OPTIONAL Grass "Y" Blades (10 oz)

64 Blades Reversible "Y" Blades with precise blade overlap which is important to achieve an even cutting result

INSTALLED Hammer Blades (27 oz)

32 Hammers Allows you to cut & mulch wooded material up to 3"

Cutting Capacity

3" Diameter With Hammer blades

Cutting Height

1/4 – 6 Variable heights allow you to set correct height for your application

Housing Thickness

1/4" Resist denting & wear

Side Plate Thickness

1/4"/7 mm Provides structural support 

Reinforced Lift Point

Standard Allowing you to lift Mower without implement being attached to your tractor 

Roller Diameter

4" Utilized to adjust cutting height, greaseable bearings and rounded at the edges to prevent gouging during turns with mud scraper for positive height control

Rotor Shaft Diameter

4 1/2" x 12mm Large diameter protects against obstructions

Reverse Rotor Rotation

Standard Shaft rotation is forward. The knives cut down and back, picking up the bent over grass, pulling in the tall grass & weeds, cutting & shredding the material & discharging it to the rear 

Blade Swing

14" Large swing so that the blades build the required force needed for cutting

Balanced Rotor & Shaft

Standard Increases the bearing life, minimizes vibrations, audible noise, power losses and finally it results in increased quality of product

Front Flappers

Standard To prevent material from being thrown out from under the deck

Side Skids

Standard Replaceable; protects sides of the mower

Adjustable Rear Panel

Standard Allows for easy inspection, cleaning, blade changing, and maintenance of your machine. The rear gate can also be left open for easier discharge in heavy conditions, or you can close the gate to greater mulching.

No. of Belts

4 Multiple belts ensure a positive transfer of power to your flail mowers blades

Belt Adjustment

Standard Loosen or tighten a few bolts to apply tension, loosen or change the belts

3-Pt Cat I Connection Width

26" Allows for easy connection to your tractor 20 HP to 45 HP

3-Pt Cat II Connection Width

32" Allows for easy connection to your tractor 55 HP to 95 HP

Driveline Type

Series 5 Quick Connect, Shear Bolt Std. 6-Spline The shear bolt protects the auger from damage if the auger becomes plugged or subjected to high loads. It is important to used the correct replacement bolt of proper size & strength to insure that the shear device will function properly. 

Bearings

Standard/Greaseable Great for ease of maintenance and availability should you need to replace the bearings

Gearbox Lubracation/Capacity

3 Quarts SAE 80W – 90 Gear Oil

Warranty

2 Year Parts available through Betst Products Parts Department

Weight

960 lbs

Crated Weight

985 lbs