Value-Leader VL-AGL Silver & Gold Ditch Bank Flail Mower: Medium Duty
Working Width
41″ – 73″
Powered By:
Tractor PTO
25- 65 HP
Comes with 14 oz Blades
Suitable for:
Brush up to 2″ thick
Playlist
- You cannot add "48" VL-AGL Silver Ditch Bank Flail Mower, VL-AGLB125" to the cart because the product is out of stock.
-
65 DITCH BANK FLAIL MOWER Cat.I w/PTO Driveline 04160LFB w/HAMMERS Hyd flow cont
$4,206.00 Read more -
48″ VL-AGL Silver Ditch Bank Flail Mower, VL-AGLB125
$3,750.00 Read more -
57″ VL-AGL Silver Ditch Bank Flail Mower, VL-AGLB145
$3,900.00 Add to cart -
41″ VL-AGL Silver Ditch Bank Flail Mower, VL-AGLB105
$3,500.00 Add to cart -
73″ VL-AGL Gold Ditch Bank Flail Mower, VL-AGLC185
$4,511.00 Read more
Who is Value-Leader?
Value-Leader Implements was started in 1995 to provide a high quality high value option to compete with USA tractor dealership branded products. The focus has always been on providing the US consumer with long lasting dependable equipment. This is more value for our customers money.
This is done by always using high quality components and testing the components use in our implements. We also test the finished products for dependability, to make sure that they not only work but, that they last. We strive for our implement to be trouble free, when maintained, for not less than a 5 year period.
Value-Leader was the first USA implement company to offer a two year warranty on tractor implements.
Looking for a better way to cut the ditch or bank? The Value-Leader hydraulic offset pivoting verge mower is flexible and perfect for the job. This verge flail mower will make your project look great. Works just like any normal flail mower pulled directly behind the tractor and with the standard hammer blades, it can mulch up to 2” in diameter objects. Same, amazing AGL mower but with premium features to set it apart from the rest.
- AGL Silver(AGLB) has a Multiple V-Belt drive with automatic belt tension & holder for hoses.
- AGL Gold(AGLC) also has a Multiple V-Belt drive with automatic belt tension along with hydraulic flow control for smoother movement of the mower.
- Cat I – 3 pt w/s Spline PTO drive shaft
- Balanced rotor shaft.
- Hydraulic up 90° and down 60° movement. Side to side movement for hard to reach areas.
- Rear roller with adjustable cutting height.
- 65 horsepower gearbox.
- Uses EF & EFG series blades with standard all-purpose hammer blades.
- Articulates 100% passed the right arm horizontally and adds an additional 20” in the vertical position.
- Extra strong and built with safety in mind.
- Durable Powder Coat Finish.
Overall Width of Ditch Bank Flail Mower: The Value-Leader VL-AGL series has an overall width of 47″ to 79″ depending on the size of the unit.
Cutting Width of Ditch Bank Flail Mower: The Value-Leader VL-AGL series has a tilling width of 41″ to 73″ depending on the size of the unit.
The weight of Ditch Bank Flail Mower: The Value-Leader VL-AGL series has a weight of 660 lbs to 875 lbs depending on the size of the unit.
HP Requirements at PTO: The Value-Leader VL-AGL series requires 25 – 65 PTO horsepower depending on the size of the unit.
Cutting Height: The Value-Leader VL-AGL series has a 0″ – 6″ Adjustable to meet various height requirements
Housing Material Thickness: The Value-Leader VL-AGL series has a housing of 1/4″ thick.
Side Plate Thickness: The Value-Leader VL-AGL series has a side plate thickness of 1/4″.
Blade Type: The Value-Leader VL-AGL series uses a standard hammer blade. Each hammer blade weighs 14 oz made of cast steel (cast steel is much more durable than cast iron). Use the hammer blades for clearing saplings (2″ diameter or less) and for grasses.
Number of Blades: The Value-Leader VL-AGL series uses 16 – 32 hammer blades, depending on the size of the unit.
Precision Blade Overlap: On the Value-Leader VL-AGL series the blades are staggered precisely with no gap in the mowing area. Blade overlap is important to achieve an even cutting result.
Rotor Rotation – Reverse: The rotor spins in the opposite direction as the wheels of the tractor when traveling forward. This allows the blades to shear the material as it is folded forward by the mowers. The material is then thrown up and over the rotor.
Rotor Tube Diameter: 4 1/2″- Heavy-duty steel tubing for long life.
Balanced Rotor Tube: The rotor tube is balanced to reduce vibration and ensures that the mower runs smooth, and reduces wear on the bearings.
Hitch Type: Category 1 standard 3-point.
Pivot Offset From Center Mount: This feature allows for an offset from the center to the right of the tractor. This feature is helpful for mowing around fences, buildings; walkways, etc. From the center of the PTO, the mower extends 37″ to 71″ depending on the size of the unit.
Hydraulic Offset: The hydraulic cylinder permits the carrier frame to be moved under your command. This permits you to control the cutting position of the mower. Designed so that you can get around rows, trees, fence lines, or whatever else is in your path. This is connected to a Remote Hydraulic designed to power the cylinder (also known as a 2-way valve) or the rear remote on your tractor design to power the cylinder. Hydraulic Requirements: Hydraulic sources must be constant flow for powering Control Valve. We recommend the use of Front Loader Style Control Valve with Float Option. Float spool connected to the vertical pivoting cylinder will allow the mower to float and naturally follow the ground contour.
Drive Belts: The VL-AGL series uses 2 – 4 belts, depending on the size of the unit.
Gearbox Rating: Up to 65 hp. Heavy-duty proved oil bath gearbox for long life.
Driveline / PTO Shaft: Shear Bolt PTO Shaft for Standard 1-3/8” 6-Spline PTO
Finish: Baked-on powder coat, powder coat is superior to paint.
Warranty: 2-year parts warranty with an optional 2-year extension.
Support Before and After the Sale: At Betstco our service department is staffed with professional technicians that inspect each machine before it is shipped. This ensures that you get a trouble-free machine from the get-go. When you need technical help or parts, our courteous staff can help you get what you need from our fully stocked warehouse. We keep a full line of replacement parts, and we can ship parts within 24 hours.
| Spec | VL-AGLB105 |
| Working Width | 41” |
| Overall Width | 47” |
| Min. HP Req. | 25 HP |
| Hitch | Cat I |
| Gear Box Rating | 65 HP |
| Pivot Offset | 37” Right |
| Vertical Offset | 150 Degrees |
| Std Hammer Blades | 16 Blades |
| Housing Thickness | 1/4” |
| Side Plate Thickness | 1/4” |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 14” |
| No. of Belts | 2 |
| 3pt Conn. Width | 28” – 29” |
| Driveline Type | 6-Spline w/shear bolt |
| Weight | 660 lbs |
| Crated Weight | 750 lbs |
| Spec | VL-AGLB125 |
| Working Width | 48” |
| Overall Width | 54” |
| Min. HP Req. | 30 HP+ |
| Hitch | Cat I |
| Gear Box Rating | 65 HP |
| Pivot Offset | 44” Right |
| Vertical Offset | 150 Degrees |
| Std Hammer Blades | 20 Blades |
| Housing Thickness | 1/4” |
| Side Plate Thickness | 1/4” |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 14” |
| No. of Belts | 3 |
| 3pt Conn. Width | 28” – 29” |
| Driveline Type | 6-Spline w/shear bolt |
| Weight | 735 lbs |
| Crated Weight | 825 lbs |
| Spec | VL-AGLB145 |
| Working Width | 57” |
| Overall Width | 63” |
| Min. HP Req. | 35 HP+ |
| Hitch | Cat I |
| Gear Box Rating | 65 HP |
| Pivot Offset | 53” Right |
| Vertical Offset | 150 Degrees |
| Std Hammer Blades | 24 Blades |
| Housing Thickness | 1/4” |
| Side Plate Thickness | 1/4” |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 14” |
| No. of Belts | 3 |
| 3pt Conn. Width | 28” – 29” |
| Driveline Type | 6-Spline w/shear bolt |
| Weight | 765 lbs |
| Crated Weight | 865 lbs |
| Spec | VL-AGLC165 |
| Working Width | 65” |
| Overall Width | 71” |
| Min. HP Req. | 40 HP+ |
| Hitch | Cat I |
| Gear Box Rating | 65 HP |
| Pivot Offset | 65” Right |
| Vertical Offset | 150 Degrees |
| Std Hammer Blades | 28 Blades |
| Housing Thickness | 1/4” |
| Side Plate Thickness | 1/4” |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 14” |
| No. of Belts | 3 |
| 3pt Conn. Width | 28” – 29” |
| Driveline Type | 6-Spline w/shear bolt |
| Weight | 820 lbs |
| Crated Weight | 945 lbs |
| Spec | VL-AGLC185 |
| Working Width | 73” |
| Overall Width | 79” |
| Min. HP Req. | 45 HP+ |
| Hitch | Cat I |
| Gear Box Rating | 65 HP |
| Pivot Offset | 71” Right |
| Vertical Offset | 150 Degrees |
| Std Hammer Blades | 32 Blades |
| Housing Thickness | 1/4” |
| Side Plate Thickness | 1/4” |
| Rotor Dia. | 4” |
| Rotor Shaft Dia. | 4 1/2” |
| Blade Swing | 14” |
| No. of Belts | 3 |
| 3pt Conn. Width | 28” – 29” |
| Driveline Type | 6-Spline w/shear bolt |
| Weight | 875 lbs |
| Crated Weight | 1000 lbs |